Deciphering the segregation of proteins in high-protein dairy powders after spray-drying.

High-protein dairy powders are ingredients mainly produced by spray-drying, then subjected to aging during transport and storage. They often undergo physicochemical changes at this stage, such as the development of the Maillard reaction, primarily because of their intrinsic chemical properties, but also as a result of nonoptimal storage conditions. Components present at the particle surface are the first to be targeted by moisture and other environmental disruptions. Consequently, the identification, control, and prediction of particle surface components are useful to anticipate the effect of powder aging on product quality. Here, a new diafiltration method is proposed which fractionates proteins from a binary colloidal dispersion of 80% casein micelles and 20% whey proteins, according to their presence at the surface or core of the particle. This method shows that whey proteins are strongly enriched at the particle surface, whereas casein micelles are located at the core of the particles. This protocol also allows the identification of the rehydration kinetics for each rehydrated protein layer of the particle, revealing that 2 distinct forms of swelling occur: (1) a rapid swelling and elution of whey proteins present at the particle surface, and (2) a swelling of casein micelles located below the whey proteins, associated with a slow elution of casein micelles from the particles being rehydrated.

Tailored SWCNT functionalization optimized for compatibility with epoxy matrices.

We have modified single walled carbon nanotubes (SWCNTs) with well defined matrix-based architectures to improve interface interaction in SWCNT/epoxy composites. The hardener and two pre-synthesized oligomers containing epoxy and hardener moieties were covalently attached to the SWCNT walls by in situ diazonium or carboxylic coupling reactions. In this way, SWCNTs bearing amine or epoxide-terminated fragments of different molecular weights, which resemble the chemical structure of the cured resin, were synthesized. A combination of characterization techniques such as Raman and infrared absorption (FTIR) spectroscopy, elemental analysis and coupled thermogravimetry-FTIR spectroscopy were used to identify both the functional groups and degree of functionalization of SWCNTs synthesized by the laser ablation and arc-discharge methods. Depending on the type of reaction employed for the chemical functionalization and the molecular weight of the attached fragment, it was possible to control the degree of functionalization and the electronic properties of the functionalized SWCNTs. Improved dispersion of SWCNTs in the epoxy matrix was achieved by direct integration without using solvents, as observed from optical microscopy and rheology measurements of the SWCNT/epoxy mixtures. Composite materials using these fillers are expected to exhibit improved properties while preserving the thermosetting architecture.

The influence of a compatibilizer on the thermal and dynamic mechanical properties of PEEK/carbon nanotube composites.

The effect of polyetherimide (PEI) as a compatibilizing agent on the morphology, thermal, electrical and dynamic mechanical properties of poly(ether ether ketone) (PEEK)/single-walled carbon nanotube (SWCNT) nanocomposites, has been investigated for different CNT loadings. After a pre-processing step based on ball milling and pre-mixing under mechanical treatment in ethanol, the samples were prepared by melt extrusion. A more homogeneous distribution of the CNTs throughout the matrix is found for composites containing PEI, as revealed by scanning electron microscopy. Thermogravimetric analysis demonstrates an increase in the matrix degradation temperatures under dry air and nitrogen atmospheres with the addition of SWCNTs; the level of thermal stability of these nanocomposites is maintained when PEI is incorporated. Both differential scanning calorimetry and synchrotron x-ray scattering studies indicate a slight decrease in the crystallization temperatures of the compatibilized samples, and suggest the existence of reorganization phenomena during the heating, which are favoured in the composites incorporating the compatibilizer, due to their smaller crystal size. Dynamic mechanical studies show an increase in the glass transition temperature of the nanocomposites upon the addition of PEI. Furthermore, the presence of PEI causes an enhancement in the storage modulus, and hence in the rigidity of these systems, attributed to an improved interfacial adhesion between the reinforcement and the matrix. The electrical and thermal conductivities of these composites decrease with the incorporation of PEI. Overall, the compatibilized samples exhibit improved properties and are promising for their use in industrial applications.

Tissue-type plasminogen activator has antiangiogenic properties without effect on tumor growth in a rat C6 glioma model.

Tissue-type plasminogen activator (tPA) plays a major role in the fibrinolytic system. According to several reports, tPA may also have antiangiogenic properties, especially in combination with a free sulfhydryl donor (FSD). In the rat C6 glioma model, in vitro and in vivo tPA synthesis by glioma cells is enhanced by differentiation therapy. To address the antiangiogenic potential of tPA in this model, tPA was overexpressed in glioma tumors by ex vivo transduction of C6 cells with a lentiviral vector encoding tPA. The transduced cells were subcutaneously implanted into nude mice. Gene transfer allowed for efficient synthesis of tPA by the C6 tumors. Although the treatment of tPA+ tumor-bearing animals with the FSD captopril generated angiostatin in situ and reduced endothelial vascularization of the tumors, it had no effect on tumor growth. Alternative mechanisms could account for this lack of effect and consequently have important implications for vascular the treatment of glioblastoma.

A dispersed fluorescence and ab initio investigation of the X2B1 and A2A1 electronic states of the PH2 molecule.

In this work, the X2B1 and A2A1 electronic states of the phosphino (PH2) free radical have been studied by dispersed fluorescence and ab initio methods. PH2 molecules were produced in a molecular free-jet apparatus by laser vaporizing a silicon rod in the presence of phosphine (PH3) gas diluted in helium. The laser-induced fluorescence, from the excited A2A1 electronic state down to the ground electronic state, was dispersed and analyzed. Ten (upsilon1upsilon2upsilon3) vibrationally excited levels of the ground electronic state, with upsilon1 < or = 2, upsilon2 < or = 6, and upsilon3 = 0, have been observed. Ab initio potential-energy surfaces for the X2B1 and A2A1 electronic states have been calculated at 210 points. These two states correlate with a 2Pi(u) state at linearity and they interact by the Renner-Teller coupling and spin-orbit coupling. Using the ab initio potential-energy surfaces with our RENNER computer program system, the vibronic structure and relative intensities of the A2A1 --> X2B1 emission band system have been calculated in order to corroborate the experimental assignments.

Chemical shift imaging with continuously flowing hyperpolarized xenon for the characterization of materials.

In this contribution we report new approaches to the MRI of materials using continuously produced laser-polarized (129)Xe gas. This leads to vastly improved sensitivity and makes new kinds of information available. The hyperpolarized xenon is produced in a continuous flow system that conveniently delivers the xenon at low partial pressure to probes for NMR and MRI experiments. We illustrate applications to the study of micropore and other kinds of void space and show for the first time that with flowing hyperpolarized xenon it is possible to obtain chemical-shift-resolved images in a relatively short time.

High-Resolution Study of the Near-Infrared A2Pi1/2-X2Sigma+ Transition of YS.

A high-resolution excitation spectrum of gaseous YS has been recorded by laser excitation spectroscopy in a supersonic molecular beam. The YS molecules were produced by the reaction of laser-ablated yttrium atoms with CS2. The band of the A 2Pi1/2-X 2Sigma+ transition near 750 nm was rotationally analyzed, and a set of molecular constants is given for both electronic states. Copyright 1998 Academic Press.